Hp laserjet 5000n инструкция пользователя

hp laserjet 5000n инструкция пользователя
Repeat Steps 11-13 to configure the remaining bytes of the IP address. Also, the «Online» button is actually a toggle switch, such that if the printer is already online, pressing Online makes the printer go offline and can be used to stop a runaway print job. The printer had an average cost per page of less than 10 cents.


Retrieved November 2, 2010. ^ «LaserJet Enterprise 600 M601, M602, And M603 Series Printer User Guide» (PDF). p. 28. Retrieved 20 February 2014. ^ «Making Standard SIMMs Work – Memory Upgrade on the HP LaserJet 6MP/5MP». . Press SELECT or RESUME . Press the ITEM repeatedly until BOOTP = YES* appears. This is due to the many different formatter board revisions. If the short cut method doesn’t reset the maintenance count then you will need to go into service mode to manually reset the maintenance count. Hold down when off, the printer will power up and print a test page including total number of pages printed. A short press would provide a form feed or tell the printer to resume from a paper jam or out-of-paper condition.

For example, the LaserJet 1018 printer has newer, smaller, and more energy-efficient technology than the LaserJet 4000. The 1018 also features USB while the older 4000 does not. Press the ITEM button until CFG NETWORK = NO appears. There was a Menu, an Item and a Value button.

Похожие записи: