Snc-rz-50p инструкция

Page 71: Troubleshooting Troubleshooting Before bringing in your camera for service, check the following as a guide to troubleshoot the problem. If the problem cannot be corrected, consult with your Sony dealer. Only the CAMERA button you pressed flashes, and the corresponding maximum panning/tilting speed is set. Page 48 CAMERA button Maximum panning/tilting speed 43 degrees/sec. 60 degrees/sec. Some encoders are listed below, and others may work if you can find the appropriate settings. Network (IP) cameras To use network cameras, Sighthound Video requires some model-specific settings to be entered. Page 28: About On-screen Menus, Main Menu Adjusting and Setting With Menus About On-Screen Menus You can change various settings, such as shooting conditions and system setup of the camera, while observing menus displayed on a connected monitor.

Attach the attachment materials (not supplied) to the ceiling bracket (B), and install the bracket on the ceiling. Page 54 If you have to place the camera on an inclined surface, make sure that the inclination is less than ±15 degrees, so that the pan/tilt performance is guaranteed. The connection details provided here are crowd sourced from the community and may be incomplete, inaccurate or both. We make no claim or warranty that you will be successful using these connection URLs or that Sony products are compatible with iSpy. The output signal can be selected in the DOWN CONVERTER menu of the camera.
More information on compatible encoders can be found here. Flat-head screwdriver Wire Insert the VISCA RS-422 connector plug into the VISCA RS-422 connector. Sony’s First IP Products Rated for Transportation Vehicle Use Five Megapixel Indoor/Outdoor Camera. Turn on the power of the BRC-H700 camera before you turn on the HD Optical Multiplex Unit. B Power indicator Lit in green: The HD Optical Multiplex Unit is in normal operation.

Похожие записи: